| Contact Daejin America, Inc. |
| • |
| • |
| • |
| • |
| • |
| • |
Click on the Search+Spec button below to rapidly search and specify Decoria products |
|
|
Material Safety Data Sheet
|
|
|
I. PRODUCT IDENTIFICATION
Name: Decoria Solid Vinyl Flooring
Description: Vinyl Flooring
II. DEPARTMENT OF TRANSPORTATION INFORMATION
Shipping name: Not Classified. Hazard Class: N/A. ID #: N/A
EMERGENCY ONLY CONTACT: CHEM-TEL -1-800-255-3924
III. HMIS (0 = minimal hazard; 4 = severe hazard)
Health = 0 Flammability = 1 Reactivity = 0
IV. PRODUCT CONTENT
This product does not contain chemicals subject to the reporting requirements of Section 313 of SARA Title III and 40
CFR 372. All components are on TSCA inventory. This product does NOT contain asbestos.
V. HAZARDOUS INGREDIENTS
| (Chemical Identity; Common Name) |
C.A.S.No. |
% |
OSHA PEL |
ACGIH TLV |
| None |
N/A |
N/A |
N/A |
N/A |
DESCRIPTION AND INGREDIENT INFORMATION
These vinyl flooring products are produced for residential and commercial (architectural) marketplace use. They come in a
wide variety of aesthetic designs, styles, colors, surface finishes, and sizes.
MISCELLANEOUS INFORMATION
Each of these products is classified as an “article” according to Title 29 of the Code of Federal Regulations, OSHA Part
1910.1200(c). They are formed to a specific shape or design during manufacture, have end use functions dependent upon
their shape or design, and do not release any hazardous chemical under normal conditions of use.
VI. PHYSICAL DATA
APPEARANCE: Material dependent. BOILING POINT (degrees F): N/A. VAPOR PRESSURE (mm Hg @ 20 degrees C): N/A.
VAPOR DENSITY (Air = 1): N/A. PERCENT VOLATILE BY WEIGHT (30 min. @ 275 degrees F): N/A.
EVAPORA-TION RATE (Butyl Acetate = 1): N/A. SOLUBILITY IN WATER: N/A. SPECIFIC GRAVITY (H 2 0 = 1): N/A. pH: N/A.
VII. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: N/A. FLAMMABLE RANGE: LEL = N/A; UEL = N/A.
EXTINGUISHING MEDIA: Water. SPECIAL FIRE FIGHTING PROCEDURES: Protect fire fighters from toxic products of combustion
by wearing self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None.
VIII. HEALTH HAZARD DATA
PRIMARY ROUTE(S) OF ENTRY: N/A. TARGET ORGANS: N/A. EFFECTS OF OVEREXPOSURE: N/A SKIN AND EYES: N/A.
INHALATION: N/A. CARCINOGENICITY: NTP: No; IARC Monographs: No; OSHA Regulated: No.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: N/K.
FIRST AID PROCEDURES: N/A. SKIN AND EYES: N/A. INHALATION: N/A. INGESTION: N/A.
IX. REACTIVITY DATA
STABILITY: N/A. INCOMPATIBILITY: N/A. HAZARDOUS DECOM-POSITION PRODUCTS: N/A. HAZARDOUS
POLYMERIZATION: N/A.
X. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: N/A. WASTE DISPOSAL METHOD: Dispose of in accordance
with Federal, State, and Local Waste Disposal Regulations.
XI. SAFE HANDLING AND USE INFORMATION
VENTILATION: N/A. RESPIRATORY PROTECTION: N/A. SKIN AND EYE PROTECTION: N/A.
XII. SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: N/A. OTHER PRECAUTIONS: N/A.
XIII. WARNING
FOR PREVIOUSLY INSTALLED FLOOR COVERING
DO NOT SAND, DRY SCRAPE, BEADBLAST, OR MECHANICALLY PULVERIZE EXISTING RESILIENT FLOORING, BACKING
OR LINING FELT. THESE PRODUCTS MAY CONTAIN EITHER ASBESTOS FIBERS OR CRYSTALLINE SILICA. POSSIBLE
CANCER AND RESPIRATORY TRACT HAZARD BY INHALATION. AVOID CREATING DUST. SMOKING BY INDIVIDUALS
WHO HAVE BEEN EXPOSED TO ASBESTOS FIBERS GREATLY INCREASES THE RISK OF SERIOUS BODILY HARM.
RFCI’S (Resilient Floor Covering Institute) RECOMMENDED WORK PRACTICES FOR REMOVAL OF RESILIENT FLOOR
COVERINGS ARE A DEFINED SET OF INSTRUCTIONS ADDRESSED TO THE TASK OF REMOVING ALL RESILIENT FLOOR
COVERING STRUCTURES.
XIV. NOTICE
Various government agencies have regulations governing the removal of in-place asbestos-containing materials. If you contemplate
the removal of a resilient floor covering structure that contains (or is assumed to contain) asbestos, you should determine whether
such regulations apply. The information presented herein is supplied as a guide to those who handle or use this product. Safe work
practices must be employed when working with any materials. It is important that the end user makes a determination regarding the
adequacy of the safety procedures employed during the use of this product.
N/A . not applicable or not available
N/K . none known or not known |
|
|